Camera Accessories

Turned OnTurned On

Price: $80

The first true hard-wired status indicator for extreme sports, tells you the exact status of your GoPro Camera while it’s mounted on your head.

Its ultra-bright LEDs shine unmistakably in your peripheral vision: blue for “standby,” red for “record” and yellow for “warning/error.”

Cross HairCross Sight

Price: $120.00

Finally, I’ve put together some low end sights for all those videographers who can’t afford to spend $250 for a concentric sight. This is the same basic sight as all the other cross sight’s you’ve seen with a few improvements…

Glass Covered Optics
I cover the optics with glass. This allows you to use a t-shirt or other soft cotton cloth to clean the surface of your sight. All the other cross sights on the market leave the polarizer material exposed and it is a relatively soft plastic which scratches easily. You don’t have to worry about the durability of this sight… it will last for many years.

Adjustable Optics
After you have mounted the sight, you may wish to change the orientation of the optics. Depending on the orientation of your installation, the pattern may not be square with your helmet. People have different tastes as well…

These sights have a threaded retaining ring and rubber o-ring that keep the optics in place. With a small straight blade screwdriver (the ones that come with a CYPRES work great!) simply loosening the retaining ring about 1/4 turn. Then grab the entire stack of optics by placing your thumb in the middle of the glass on one side, and place your index finger in the middle of the glass on the other side. Squeeze the optics and turn them as one unit. Since there are two glass layers surrounding a custom laminated polarizer stack, you want to turn them as one unit so you don’t scratch the polarizer laminate. Turn the optic to where you want it and tighten the retaining ring back to the original position.

Removable Shaft
The shaft comes off to allow you to custom cut the shaft without endangering the optics (in the garage near the saws, you know). Once the shaft is cut to size, you should tighten the bezel down to the shaft. It would be advisable to use lock-tight (the blue one) or crazy glue to lock the threads, but this is not necessary as you should not be twisting it hard enough to unscrew the bezel during field adjustments if you are using the proper clamp.

I occasionally have some ‘blemish’ sights which may have a fleck or two in the optics, but this cannot be seen when it’s in use. Please call for pricing and availability.

Sony Pro Mouth Switch – Micro USB/Multi Terminal 90 Degree Plug

canonplug

Price: $75

Camera Model

No adapter needed! This pro mouth switch is one of a kind because of the 90 degree angle. The 90 degree angle helps the cable curve closer to the camera, preventing the risk of it breaking off.

All you need to do is specify the exact camera model and year.

**Compatible with 2015 and newer,

A6300, A7 R, A7S, A7 Mark II

**Compatible with 2015 and older,

A6000, A5000, A5100

If not sure give us a call at (845)255-2252, also Nikon switches available

Tonfly Go Pro Curved Safety Mount

$67.00tonflygopromountsafety

This mount is made to reduce the danger of lines entanglement to your camera.

Fly Site

Price $200

FlySight is not your mother’s GPS. flysite

FlySight was designed from the ground up for wingsuit pilots and does one truly revolutionary thing…

FlySight provides real-time audible indication of glide ratio, horizontal or vertical speed.

If you’ve used other GPS receivers, you know the drill. When you land, you review data from the jump. If you’re lucky, or if you’ve planned a very simple jump, you might remember what you were doing when your glide ratio maxed out. On the next jump, you try to do it again.

FlySight speeds the learning process.

When you change your body position, you instantly hear a change in the tone. Your brain easily connects this feedback with your precise body position, making it astonishingly easy to remember what worked and what didn’t.

Concentric Ring Sight

Price: $275.00

Concentric Site

Hi all. After a few of years of tinkering around, finding raw materials sources, and clearing all the engineering hurdles I put together some killer ring sights. These are concentric ring sights.. like military surplus, but all new parts. They are the best made concentric sights in the world.

Glass Covered Optics
I cover the optics with glass. This allows you to use a t-shirt or other soft cotton cloth to clean the surface of your sight. All the other cross sights on the market leave the polarizer material exposed and it is a relatively soft plastic which scratches easily. You don’t have to worry about the durability of this sight… it will last for many years. Some cheaper built sights (Concentric and Cross) have plastic polarizers as the surface material for the optical stack, but I went the extra mile to have thin glass substrates cut (just like the military ones) and assembled them together inside a beautiful anodized aluminum bezel.

Removable Shaft
The shaft comes off to allow you to custom cut the shaft without endangering the optics (in the garage near the saws, you know). Once the shaft is cut to size, you should tighten the bezel down to the shaft. It would be advisable to use lock-tight (the blue one) or crazy glue to lock the threads, but this is not necessary as you should not be twisting it hard enough to unscrew the bezel during field adjustments if you are using the proper clamp.

Swivel ClampSwivel Clamp

Price: $25.00

This is to be used with Articulated site extender and ringsight.

Articulated Site ExtenderRemovable Articulating Ringsight Bracket

Price: $85.00

This is to be used with Swivel Clamp and Ringsight.

Gaffers TapeGaffers Tape

Price: $25.00

Most useful with camera helmet and equipement. BLACK ONLY.

Canon PRO Mouth Switch – Digital

Price $70.00

The newest in camera switches. This unit already has the digital plug for the high end Canon cameras. You just plug it in and your ready to go.

Works with these Canon cameras:

D30, D60, 10D, 20D, 30D, 5D, D1, D1 MarkII, Ds1 MarkII

PRO Mouth Swith - Digital

Canon PRO Mouth Switch – Stereo Plug

Price $45.00

The newest in camera switches. This unit already has the 2.5mm stereo plug for Canon cameras. You just plug it in and your ready to go.

Works with all stereo plug cameras.

Tonfly GoPro Flat Safety Mount

$67.00

Gopro Safty mount-flat0052

This mount is made to reduce the danger of lines entanglement to your camera.